Accessories

Description

The Video Input is connected to the Mercator-PC via the USB interface. It enables the display of video signals (e.g. from a Cell Camera) in high quality on the Mercator-PC and allows to record video sequences and save them in AVI format.

Technical Data:

• USB 2.0 Plug and Play
• Direct Capturing of any analog video source
• Automatic NTSC / PAL detection
• Video output in MPEG 4/2/1-Format
• Video resolution: PAL: 720 x 576 at 25 fps, NTSC: 720 x 480 at 30 fps
• External inputs: Composite, S-Video, Stereo Audio

System requirements:

• Intel® Pentium® IV 1GHz or higher
• min. 256 MB RAM
• one free USB 2.0 slot
• Graphic board supporting DirectX 9.0c or higher
• Sound board (AC97-compatibel)
• min. 1 GB of free hard disc space

Description

Video-Switch with 8 inputs and 2 outputs in desktop housing. The outputs can be programmed manually or as a sequence output with adjustable interval times. Bypass-Function for each input is manually programmable, too.

Technical Data:

• Video inputs: 8x BNC 75 Ω
• Video outputs: 2x BNC 75 Ω (A and B setable to spot and sequenz output)
• Video bandwidth: 10 MHz (+/-3 dB)
• Signal- / noise distance: >60 dB
• Isolation: 56 dB at 4,5 MHz
• Switching interval: 1 – 120 sek., setable for A and B
• Bypass-Function: Manually programmable
• Switching in video sampling gap – Applies when using the same AC phase angle with cameras and switcher
• Power supply: 15 VAC*) 50/60 Hz
• Power consumption: Ca. 4,5 W
• Temperature: +10 °C to +35 °C
• Housing: sheet steel
• Dimensions (HxBxD): 49 x 210 x 182 mm
• Weight: 1,5 kg (incl. power supply unit)